Clarke CCRT266 Kullanım ve Bakım Talimatları Kılavuzu - Sayfa 11
Elektrikli Alet Clarke CCRT266 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları Kılavuzu indirin. Clarke CCRT266 17 sayfaları. Cordless rotary tool kit
Sayfayı Yazdır
OPERATING INSTRUCTIONS
OPERATING THE ROTARY TOOL
WARNING: BEFORE OPERATING THE ON/OFF SWITCH, MAKE SURE THAT
THE COLLET AND ACCESSORIES HAVE BEEN CORRECTLY AND SECURELY
FITTED.
1. To switch the rotary tool on, rotate the
speed control away from 0.
2. Select a suitable speed using the
speed controller.
• The low speed settings should be
used for removing rust, and
polishing.
• The medium speed settings should
be used for drilling, engraving,
sharpening and removing paint.
• The high speed settings should be used for cutting metal and sanding wood.
3. To switch the rotary tool off, set the speed control to 0.
WARNING: ALWAYS WAIT FOR COMPLETE RUN DOWN, AND THE
ACCESSORY TO STOP ROTATING, BEFORE PUTTING THE ROTARY TOOL
ASIDE.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
11