Clarke CCRT266 Manuel d'utilisation et d'entretien - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Clarke CCRT266. Clarke CCRT266 17 pages. Cordless rotary tool kit
Imprimer la page
ADDITIONAL SAFETY INSTRUCTIONS FOR ROTARY
TOOLS
1. Only use accessories supplied for use with this tool.
2. Never use worn or cracked accessories.
3. Hold the tool away from your face when switching on.
4. Keep your fingers away from rotating accessories.
5. Be careful not to accidently hit any foreign objects in the workpiece.
6. If an accessory jams, switch the tool off and disconnect the battery before
attempting to free the accessory.
7. Clamp the workpiece whenever possible especially when using cutting discs.
8. Always wear a dust mask and eye protection.
9. Thoroughly remove all dust after sanding.
10. Take special care when sanding paint which is possibly lead based or when
sanding some woods (e.g. MDF) and metal which may produce toxic dust:
• Wear a dust mask specifically designed for protection against lead paint dust
and fumes and ensure that persons within or entering the work area are also
protected.
• Do not let children or pregnant women enter the work area.
• Do not eat, drink or smoke in the work area.
• Dispose of dust particles and other debris safely.
11. Abrasive wheels should be stored and handled with care. (when not in use,
accessories should be stored in the box provided for protection).
12. Inspect grinding wheels/accessories before use. Do not use chipped, cracked or
otherwise defective products.
13. Ensure that all accessories are fitted in accordance with the manufacturers
instructions.
14. Ensure that the abrasive accessory is correctly mounted and tightened before
use. Run the tool with no-load for 30 seconds in a safe position and stop
immediately if there is vibration or if other defects are detected. If this condition
occurs, check the machine to determine the cause.
15. Check that the work piece is properly supported.
16. Do not use a cut-off wheel for side grinding.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
5