Clarke CCRT266 운영 및 유지보수 지침 매뉴얼 - 페이지 5

{카테고리_이름} Clarke CCRT266에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CCRT266 17 페이지. Cordless rotary tool kit

ADDITIONAL SAFETY INSTRUCTIONS FOR ROTARY

TOOLS

1. Only use accessories supplied for use with this tool.

2. Never use worn or cracked accessories.

3. Hold the tool away from your face when switching on.

4. Keep your fingers away from rotating accessories.

5. Be careful not to accidently hit any foreign objects in the workpiece.

6. If an accessory jams, switch the tool off and disconnect the battery before

attempting to free the accessory.

7. Clamp the workpiece whenever possible especially when using cutting discs.

8. Always wear a dust mask and eye protection.

9. Thoroughly remove all dust after sanding.

10. Take special care when sanding paint which is possibly lead based or when

sanding some woods (e.g. MDF) and metal which may produce toxic dust:

• Wear a dust mask specifically designed for protection against lead paint dust

and fumes and ensure that persons within or entering the work area are also

protected.

• Do not let children or pregnant women enter the work area.

• Do not eat, drink or smoke in the work area.

• Dispose of dust particles and other debris safely.

11. Abrasive wheels should be stored and handled with care. (when not in use,

accessories should be stored in the box provided for protection).

12. Inspect grinding wheels/accessories before use. Do not use chipped, cracked or

otherwise defective products.

13. Ensure that all accessories are fitted in accordance with the manufacturers

instructions.

14. Ensure that the abrasive accessory is correctly mounted and tightened before

use. Run the tool with no-load for 30 seconds in a safe position and stop

immediately if there is vibration or if other defects are detected. If this condition

occurs, check the machine to determine the cause.

15. Check that the work piece is properly supported.

16. Do not use a cut-off wheel for side grinding.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]