Clarke CRT 40 Instructions pour l'utilisateur - Page 7
Parcourez en ligne ou téléchargez le pdf Instructions pour l'utilisateur pour {nom_de_la_catégorie} Clarke CRT 40. Clarke CRT 40 13 pages. 40-piece rotary tool kit
Également pour Clarke CRT 40 : Instructions pour l'utilisateur (6 pages)
Imprimer la page
OPERATION
Assemble the tool as described previously.
Holding the tool firmly, and ensuring your fingers are
well away from the rotating parts, plug into the mains
and switch ON by pressing 'I' (A).
Adjust the speed according to the job in hand, by
turning the adjuster 'B', using the tables below for
reference.
To switch OFF, press 'O' (A).
CAUTION! NEVER put the tool down until it has
stopped completely.
DO NOT use force when using this tool; a light
pressure is all that is required.
REFERENCE TABLES
•
The following speeds are for guidance only.
1. Grinding Stones
Material
Stone, Shell
Steel
Aluminium, Brass
Plastic
2. Polishing Bob
Material
Steel
Aluminium, Brass
Plastic
Speed
1
5
2
1
Speed
5
3
5
7