Clarke CRT 40 Kullanıcı Talimatları - Sayfa 7

Elektrikli Alet Clarke CRT 40 için çevrimiçi göz atın veya pdf Kullanıcı Talimatları indirin. Clarke CRT 40 13 sayfaları. 40-piece rotary tool kit
Ayrıca Clarke CRT 40 için: Kullanıcı Talimatları (6 sayfalar)

Sayfayı Yazdır

1. Parts Diagram
2. Spare Parts and Service Contacts

OPERATION

Assemble the tool as described previously.

Holding the tool firmly, and ensuring your fingers are

well away from the rotating parts, plug into the mains

and switch ON by pressing 'I' (A).

Adjust the speed according to the job in hand, by

turning the adjuster 'B', using the tables below for

reference.

To switch OFF, press 'O' (A).

CAUTION! NEVER put the tool down until it has

stopped completely.

DO NOT use force when using this tool; a light

pressure is all that is required.

REFERENCE TABLES

•

The following speeds are for guidance only.

1. Grinding Stones

Material

Stone, Shell

Steel

Aluminium, Brass

Plastic

2. Polishing Bob

Material

Steel

Aluminium, Brass

Plastic

Speed