Zanussi ZOG10311XK Manuel de l'utilisateur - Page 17
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Zanussi ZOG10311XK. Zanussi ZOG10311XK 25 pages.
Également pour Zanussi ZOG10311XK : Manuel de l'utilisateur (24 pages)
Imprimer la page
3. Seal the connection correctly. Use a leak
detection to control it.
ADJUSTMENT TO DIFFERENT TYPES OF GAS
Only a qualified technician is
authorized to handle adjustment of
different types of gas.
The oven is set for natural gas, you
can change it to liquid gas, with the
correct injectors.
The gas rate is adjusted to suit.
WARNING! Before you replace the
injectors, make sure that the gas
knobs are in the Off position.
Disconnect the oven from the
electrical supply. Let the oven cool
down. There is a risk of injury.
GAS GRILL INJECTOR REPLACEMENT
1. Release the screws which keep the grill burner
in position (A).
2. Carefully move forward the burner off the
injector support. Slowly move it down. Do not
apply force to the wire of the spark plug
connector (B) and to the thermocouple
conductor (C).
3. Release the burner injector (D) with a 7 mm
socket spanner and replace it with a different
one which is necessary for the type of gas you
use.
Refer to "Technical data" chapter.
C
4. Assemble the burner in a reverse sequence.
Before you fix the screw, make sure that the
burner is pushed correctly to the back panel.
Test the grill injectors.
A
D
B
OVEN INJECTOR REPLACEMENT
1. Remove the bottom plate of the oven cavity (A)
to get access to the oven burner (B).
B
A
2. Release the screw (C), which keeps the burner
in position.
C
3. Carefully move the burner off the injector
support (D).
E
4. Slowly move it to the left side. Do not apply
force to the wire of the spark plug connector
(F) and to the thermocouple conductor (E).
D
F
17