Zanussi ZOG10311XK Panduan Pengguna - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Oven Zanussi ZOG10311XK. Zanussi ZOG10311XK 25 halaman.
Juga untuk Zanussi ZOG10311XK: Panduan Pengguna (24 halaman)

Halaman Cetak

1. Daily Use

3. Seal the connection correctly. Use a leak

detection to control it.

ADJUSTMENT TO DIFFERENT TYPES OF GAS

Only a qualified technician is

authorized to handle adjustment of

different types of gas.

The oven is set for natural gas, you

can change it to liquid gas, with the

correct injectors.

The gas rate is adjusted to suit.

WARNING! Before you replace the

injectors, make sure that the gas

knobs are in the Off position.

Disconnect the oven from the

electrical supply. Let the oven cool

down. There is a risk of injury.

GAS GRILL INJECTOR REPLACEMENT

1. Release the screws which keep the grill burner

in position (A).

2. Carefully move forward the burner off the

injector support. Slowly move it down. Do not

apply force to the wire of the spark plug

connector (B) and to the thermocouple

conductor (C).

3. Release the burner injector (D) with a 7 mm

socket spanner and replace it with a different

one which is necessary for the type of gas you

use.

Refer to "Technical data" chapter.

4. Assemble the burner in a reverse sequence.

Before you fix the screw, make sure that the

burner is pushed correctly to the back panel.

Test the grill injectors.

OVEN INJECTOR REPLACEMENT

1. Remove the bottom plate of the oven cavity (A)

to get access to the oven burner (B).

2. Release the screw (C), which keeps the burner

in position.

3. Carefully move the burner off the injector

support (D).

4. Slowly move it to the left side. Do not apply

force to the wire of the spark plug connector

(F) and to the thermocouple conductor (E).