Zanussi FCS 825C Livret d'instructions et d'installation - Page 17
Parcourez en ligne ou téléchargez le pdf Livret d'instructions et d'installation pour {nom_de_la_catégorie} Zanussi FCS 825C. Zanussi FCS 825C 40 pages.
Imprimer la page
Unpacking
Damages
If the machine has been damaged during transport, you
should immediately notify the company responsible for
delivering it.
Check that the machine is undamaged. If you discover
any damage, faults or that anything is missing, you should
notify the dealer immediately.
Never leave packaging material in a place
where children may play with it.
When lifting the machine
Be careful when lifting the machine. Incorrect methods of
lifting can cause physical injuries and also increase the
risk of damage to the machine. Open the door and take
hold of the top inside of the door opening. You can also
lift the machine by gripping the rear overhang of the top.
Never lift the machine by gripping it's control
panel, door, or detergent dispenser. (Fig. 1).
Transit locking devices
When supplied the washing machine is packed using a
number of locking devices/packing pieces to prevent
drum and motor from damage in transit. These must all
be removed before installed the washing machine.
1. Spread some of the polystyrene packaging
materials on the floor behind the machine and
then lay the machine carefully rearside down
on them.
Make sure that no hoses are crushed in the
process (Fig. 2).
2. Remove the polystyrene base and the support
bar which the machine rests on.
3. Return the machine to it's normal upright position
and remove the three screws and their spacers
on it's rear (Fig. 3).
4. The three holes must then be plugged with the
plastic plugs supplied, which can be found in a
plastic bag inside the drum (Fig. 4).
1
2
3
4
- 17 -