Zanussi FCS 825C Instrukcja obsługi i broszura instalacyjna - Strona 17

Przeglądaj online lub pobierz pdf Instrukcja obsługi i broszura instalacyjna dla Spryskiwacz Zanussi FCS 825C. Zanussi FCS 825C 40 stron.

Unpacking

If the machine has been damaged during transport, you

should immediately notify the company responsible for

delivering it.

Check that the machine is undamaged. If you discover

any damage, faults or that anything is missing, you should

notify the dealer immediately.

Never leave packaging material in a place

where children may play with it.

Be careful when lifting the machine. Incorrect methods of

lifting can cause physical injuries and also increase the

risk of damage to the machine. Open the door and take

hold of the top inside of the door opening. You can also

lift the machine by gripping the rear overhang of the top.

Never lift the machine by gripping it's control

panel, door, or detergent dispenser. (Fig. 1).

When supplied the washing machine is packed using a

number of locking devices/packing pieces to prevent

drum and motor from damage in transit. These must all

be removed before installed the washing machine.

1. Spread some of the polystyrene packaging

materials on the floor behind the machine and

then lay the machine carefully rearside down

on them.

Make sure that no hoses are crushed in the

process (Fig. 2).

2. Remove the polystyrene base and the support

bar which the machine rests on.

3. Return the machine to it's normal upright position

and remove the three screws and their spacers

on it's rear (Fig. 3).

4. The three holes must then be plugged with the

plastic plugs supplied, which can be found in a

plastic bag inside the drum (Fig. 4).

- 17 -