Zanussi ZGF 7899 Livret d'instructions - Page 10

Parcourez en ligne ou téléchargez le pdf Livret d'instructions pour {nom_de_la_catégorie} Zanussi ZGF 7899. Zanussi ZGF 7899 11 pages.

Fitting the Hob to the Worktop

Carry out the building in of the hob as follows:

• put the seals supplied with the hob, on

the edges of the cut out: place them at

8 mm from the front and rear edge and

at 50 mm from the side edges, as

shown in figure 4, taking care that the

seals meet without overlapping;

• place the hob in the cut out, taking care

that it is centred;

• fix the hob with the relevant fixing clamps

and screws, as shown in figure 5. When

the screws have been tightened, the

excess seal can be removed.

The edge of the hob forms a double seal which

prevents the ingress of liquids.

FO 0199

Fig. 4

Seal

Fig. 5