Zanussi ZGG 743 EX Livret d'instructions - Page 34
Parcourez en ligne ou téléchargez le pdf Livret d'instructions pour {nom_de_la_catégorie} Zanussi ZGG 743 EX. Zanussi ZGG 743 EX 39 pages. Electronic gas hob
Imprimer la page
Building In
A = Auxiliary burner
SR = Semirapid burner
R = Rapid burner
Fig. 1
The hob is designed to be inserted in
modular kitchen units with depth of 550 -
600 mm and having proper characteristics.
The building-in is also possible in modular
units with a 600 mm width: in this case,
the cut-out in the work top must be carried
out as shown in Fig. 2.
The worktop must be at least 30 mm thick.
If the worktop is thicker than 50 mm, it is
possible to install the hob on modular units
of any width.
Any unit (furniture unit, household
appliance, etc..) placed near the unit which
the hob is built in, shall not exceed the
worktop height.
A minimum clearance of 100 mm
between the cut-out in the
worktop and any side wall
exceeding the worktop height
must be observed.
The hob dimensions and the cut-out
dimensions are given in fig. 1 and 2.
34
SR
SR
A
A) Worktop
B) Removable Panel
Dimensions are given
in millimetres
R
Fig. 2