Zanussi ZGG 743 EX Instruction Booklet - Page 34

Browse online or download pdf Instruction Booklet for Hob Zanussi ZGG 743 EX. Zanussi ZGG 743 EX 39 pages. Electronic gas hob

Print Page

Building In

A = Auxiliary burner

SR = Semirapid burner

R = Rapid burner

Fig. 1

The hob is designed to be inserted in

modular kitchen units with depth of 550 -

600 mm and having proper characteristics.

The building-in is also possible in modular

units with a 600 mm width: in this case,

the cut-out in the work top must be carried

out as shown in Fig. 2.

The worktop must be at least 30 mm thick.

If the worktop is thicker than 50 mm, it is

possible to install the hob on modular units

of any width.

Any unit (furniture unit, household

appliance, etc..) placed near the unit which

the hob is built in, shall not exceed the

worktop height.

A minimum clearance of 100 mm

between the cut-out in the

worktop and any side wall

exceeding the worktop height

must be observed.

The hob dimensions and the cut-out

dimensions are given in fig. 1 and 2.

A) Worktop

B) Removable Panel

Dimensions are given

in millimetres

Fig. 2