Zanussi ZBB27450SA Manuel de l'utilisateur - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Zanussi ZBB27450SA. Zanussi ZBB27450SA 16 pages. Fridge freezer
Imprimer la page
Problem
If the advice does not lead to the
desired result, contact the nearest
Authorised Service Centre.
Replacing the lamp
CAUTION!
Disconnect the plug from the mains
socket.
1. At the same time, with the fingers expand
up and down the transparent cover and
unhook it in the direction of the arrows.
1
2
1
Technical information
Technical data
Dimensions of the recess
Height
Width
Depth
Rising time
Voltage
Frequency
The technical information are situated in the
rating plate, on the external or internal side of
the appliance and in the energy label.
10
Possible cause
There is no cold air circulation
in the appliance.
2. Replace the lamp with one of the same
3. Reassemble the lamp cover.
4. Connect the plug to the mains socket.
5. Open the door.
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to
3. If necessary, replace the defective door
mm
mm
mm
Hours
Volts
Hz
Make sure that there is cold air cir-
culation in the appliance.
power and shape, specifically designed for
household appliances. (the maximum power
is shown on the light bulb cover).
Make sure that the light comes on.
"Installation".
gaskets. Contact the Authorised Service
Centre.
1780
560
550
22
230 - 240
50
Solution
www.zanussi.com