Directed Viper 220 MAX Manuel d'installation - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Directed Viper 220 MAX. Directed Viper 220 MAX 18 pages. Recreational vehicle security system

Imprimer la page

Ignition. Turn the vehicle key to the "ON" or "RUN" position. Then turn vehicle key to the

the "OFF" position.

Choose a menu. Press and HOLD the Valet/Program switch : (The Valet/Program switch

must be plugged into the blue port.) After three seconds the siren will chirp once indi-

cating entry to the Basic Features Menu #1. If this is the menu you wish to access, release

the button and go to the next step. If the button is not released, you will jump to the

advanced Features Menu #2 and the siren will chirp twice. Once you have selected the

desired menu, release the Valet/Program button and then proceed with next step.

Select a feature. Press and release the Valet/Program switch the number of times corre-

sponding to the feature you wish to change. For example, to access the third feature, press

and release the switch three times. Then press the switch once more and HOLD it. The siren

will chirp the number of times equal to the step you have accessed.

Transmit . While holding the Valet/Program switch, you can toggle the feature ON and OFF

using the transmitter. Pressing the arm/disarm button will select the one chirp setting.

Pressing the AUX button will select the two chirps setting.

Ignition. Release the Valet/Program switch and turn the vehicle key to the "ON" posi-

tion.(A long chirp will be heard to confirm that you have been exited from programming)

Once the programming is done. "Green H 1/5" remove the Green wire from the ground.

To exit the system features learn routine, do one of the following:

■ Turn the vehicle key to the "ON" position.

■ More than 15 seconds elapses between steps.

■ Valet®/Program switch is pressed too many times.

System features descriptions

MENU # 1 - BASIC FEATURES