ACOPOWER HY-SG-PS500 Manuel de l'utilisateur - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ACOPOWER HY-SG-PS500. ACOPOWER HY-SG-PS500 3 pages. Portable solar generator
Imprimer la page
11.Power Indicator
1.It has four LEDs to display the remaining battery capacity. When being
re-charged, the LED will flash based on the current battery level:
Charging: (
:LED flash /
100%
26% - 50%
76% - 99%
51% - 75%
2.When you want to check the remaining power level under standby or
while working, short press the main power button to check as below:
100% - 75%
75% - 50%
50% - 25%
25% - 10%
● Low Battery: When the battery is lower than 10%, the 1st LED will be
blinking.
● AC Power LED indicator: When it is green, AC output is on, when it is
red, AC output is not working as intended.
12.Caution
1.Do not cover the Generator with anything that would prevent heat from
escaping.
2.The Generator does not have an IP waterproof rating. Do not use in
rain or in any other situations can get wet.
: LED is off /
: LED is on)
0% - 25%
≤10%
3.Please keep away from fire and children.
4.Please do not disassemble the product.
5.Fully charge the Solar Generator before long time storage.
Check the battery percentage every 3 months.
6. When not in use, make sure to turn off the Solar Generator to
conserve battery power.
7. Please do not leave the Solar Generator in situations where it
can reach extreme temperatures exceeding 50℃such as inside
a vehicle or outside direct sunlight.
Add:4120 Valley Blvd. Walnut, CA 91789.USA
Tel: 1.626.575.8822
Email:[email protected]