ACOPOWER HY-SG-PS500 Panduan Pengguna - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Inverter ACOPOWER HY-SG-PS500. ACOPOWER HY-SG-PS500 3 halaman. Portable solar generator

11.Power Indicator

1.It has four LEDs to display the remaining battery capacity. When being

re-charged, the LED will ﬂash based on the current battery level:

Charging: (

:LED ﬂash /

100%

26% - 50%

76% - 99%

51% - 75%

2.When you want to check the remaining power level under standby or

while working, short press the main power button to check as below:

100% - 75%

75% - 50%

50% - 25%

25% - 10%

● Low Battery: When the battery is lower than 10%, the 1st LED will be

blinking.

● AC Power LED indicator: When it is green, AC output is on, when it is

red, AC output is not working as intended.

12.Caution

1.Do not cover the Generator with anything that would prevent heat from

escaping.

2.The Generator does not have an IP waterproof rating. Do not use in

rain or in any other situations can get wet.

: LED is oﬀ /

: LED is on)

0% - 25%

≤10%

3.Please keep away from ﬁre and children.

4.Please do not disassemble the product.

5.Fully charge the Solar Generator before long time storage.

Check the battery percentage every 3 months.

6. When not in use, make sure to turn oﬀ the Solar Generator to

conserve battery power.

7. Please do not leave the Solar Generator in situations where it

can reach extreme temperatures exceeding 50℃such as inside

a vehicle or outside direct sunlight.

Add:4120 Valley Blvd. Walnut, CA 91789.USA

Tel: 1.626.575.8822