Aleko AR2000 Manuel de l'utilisateur - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Aleko AR2000. Aleko AR2000 16 pages.
Imprimer la page
AR2000 SLIDING GATE OPERATOR
1.Important safety information
Carefully read and follow all safety precaution and warnings before attempting to install and use
this operator, incorrect installation can lead to severe injury.
The gate operator should be installed by a qualified technician; otherwise, serious personal
injury or property damage may occur.
The auto-reverse function must be checked during installation to ensure that the gate can
auto-reverse in the event of obstruction.
This auto-reverse function should be regularly inspected and adjusted, if necessary.
When opening or closing the gate, do not attempt to walk or drive through the gate.
Children should not be allowed to play near or operate automatic gates.
Install the gate operator on the inside of the property, DO NOT install it on the outside of the
property where the public has access to it.
Be careful when in close proximity to moving parts where hands or fingers could be
pinched.
Do not allow control devices to be placed so that a person can access them by reaching
through the gate.
In the event of power failure, an emergency release key allows you to operate the gate
manually.
The operator should be switched off before repairing it or opening its cover.
Please erase and reset the code after installing the operator.
2. Main features
The device is used to drive the sliding gate.
For your safety, the operator will stop and reverse if it was obstructed on closing and stop
when it was obstructed on opening.
Supports up to 100 remote controls.
Infrared terminal (N.C) is supplied to use.
Auto-close feature is available for this operator.
Pedestrian mode.
Manual key release design for emergency purposes.
3. Technical parameters
Power supply
Motor speed
Gate moving speed
Output torque (It is adjustable by
pressure screw see Fig.2)
Limit switch
Remote control operating range
Frequency
Remote control mode
Auto-close time
Working time
Noise
Environmental temperature
Table 1
AC 110V, 60Hz
1540r/min
13 m/min
14 N·m
Magnetic limit switch
30m
433.92MHz
Single-button
0-44 sec.
90 sec.
≤58dB
-10ºC~+55ºC
3