Clarke COBS1 Manuel d'utilisation et d'entretien - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Clarke COBS1. Clarke COBS1 17 pages. Oscillating bobbin sander
Imprimer la page
ASSEMBLY
FITTING THE SANDPAPER SLEEVE ONTO THE BOBBIN
1. Fit the sandpaper sleeve on to the
bobbin as shown.
NOTE: The 13mm sanding sleeve
does not fit onto a bobbin, it
simply slides directly onto the
spindle.
PARTS STORAGE
1. The storage slots on the front are
used to store the table inserts.
2. The storage slots on the rear are
used to store the bobbins/sanding
sleeves and the spanner supplied.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
8