Clarke COBS1 Instrukcja obsługi i konserwacji - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Sander Clarke COBS1. Clarke COBS1 17 stron. Oscillating bobbin sander

ASSEMBLY

FITTING THE SANDPAPER SLEEVE ONTO THE BOBBIN

1. Fit the sandpaper sleeve on to the

bobbin as shown.

NOTE: The 13mm sanding sleeve

does not fit onto a bobbin, it

simply slides directly onto the

spindle.

PARTS STORAGE

1. The storage slots on the front are

used to store the table inserts.

2. The storage slots on the rear are

used to store the bobbins/sanding

sleeves and the spanner supplied.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]