Clarke METALWORKER CBB200E Manuel d'utilisation et d'entretien - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Clarke METALWORKER CBB200E. Clarke METALWORKER CBB200E 13 pages. 550w buffer/polisher
Imprimer la page
ASSEMBLY
MOUNTING THE MACHINE
1. Bolt the buffer/polisher to a
workbench using the securing holes
shown.
• Check that all assembly nuts
and bolts are secure before
turning the machine on.
FITTING BUFFING/POLISHING PADS
1. Place the spacer over the shaft.
2. Place the polishing mop between the washers and secure with the retaining
nut, hand tight.
• The shaft threaded ends are handed LH and RH.
3. Tighten the nuts enough to grip without crushing the buffing/polishing pad.
NOTE: Wheel rotation, in use, will tighten the retaining nut.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
7