Clarke OBS-18DC Fonctionnement ? et sécurité - Page 2
Parcourez en ligne ou téléchargez le pdf Fonctionnement ? et sécurité pour {nom_de_la_catégorie} Clarke OBS-18DC. Clarke OBS-18DC 2 pages. Orbital sander
Également pour Clarke OBS-18DC : Manuel de l'opérateur (14 pages)
Imprimer la page
OBS-18DC Orbital Sander
Questions or Problems?
Contact Clarke
Technical Service at
800-356-7274.
Need more
information?
The instructions on this
sheet are abbreviated
instructions only and are
provided solely as a
customer service. They
are not meant to replace
the tool's operation
manual. If you are
unsure of the tool's safe
and proper operation,
please request an
operator's manual from
one of our sales
associates.
Step
Start the sander:
Step
1
Stand directly behind the sander.
2
Grip one or both of the control levers securely.
6
3
Press the Interlock button.
When the motor starts, release the interlock, but
4
keep at least one of the control levers pressed
upward.
Slowly move the sander across the surface of the floor.
The pad will rotate quickly, so it is not necessary to move
with the grain of the wood as it is with the drum sander. The
7
square shape of the pad should allow you to cover the entire
floor, including the edges.
Note: Keep the sander in motion while the motor is
running to avoid damage and swirling.
8
When finished, release the control levers to stop the
machine.
Note: Empty the filter bag frequently to prevent a fire hazard.
Check the bag periodically to make sure it does not fill
up. Never leave the sander unattended without emptying
the bag first.
Action
Action