Clarke HSEC650A Manuel d'utilisation et d'entretien - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Clarke HSEC650A. Clarke HSEC650A 17 pages. Submersible pumps
Également pour Clarke HSEC650A : Instructions d'utilisation et d'entretien (20 pages)
Imprimer la page
• You can adjust the position at
which the float switch lead is
held to the pump. Adjusting
the length of the float switch
lead will change the depth of
water at which the pump will
turn on or off.
5. When the pumping is finished,
disconnect the pump from the
mains power supply.
CAUTION: DO NOT ALLOW THE PUMP TO RUN DRY
OVERLOAD SWITCH
These pumps are fitted with a thermal overload switch. If the pump overheats
for any reason, it will automatically switch the pump OFF. Once the pump has
cooled (at least 5-10 minutes), it will automatically restart.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
6