Clarke HSEC650A 운영 및 유지보수 지침 매뉴얼 - 페이지 6
{카테고리_이름} Clarke HSEC650A에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke HSEC650A 17 페이지. Submersible pumps
Clarke HSEC650A에 대해서도 마찬가지입니다: 운영 및 유지 관리 지침 (20 페이지)
페이지 인쇄
• You can adjust the position at
which the float switch lead is
held to the pump. Adjusting
the length of the float switch
lead will change the depth of
water at which the pump will
turn on or off.
5. When the pumping is finished,
disconnect the pump from the
mains power supply.
CAUTION: DO NOT ALLOW THE PUMP TO RUN DRY
OVERLOAD SWITCH
These pumps are fitted with a thermal overload switch. If the pump overheats
for any reason, it will automatically switch the pump OFF. Once the pump has
cooled (at least 5-10 minutes), it will automatically restart.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
6