Clarke LEP1A 7260060 Manuel d'utilisation et d'entretien - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Clarke LEP1A 7260060. Clarke LEP1A 7260060 12 pages. Clean water pump
Imprimer la page
CLEANING AND MAINTENANCE
MAKE SURE THAT THE PUMP IS DISCONNECTED FROM THE MAINS SUPPLY
BEFORE CLEANING, OR PERFORMING ANY MAINTENANCE.
•
These pumps should require no maintenance other than regular cleaning. If the
pump starts to show signs of wear or damage, contact your CLARKE dealer for
advice.
•
Do not attempt to repair the pump yourself, repairs must be carried out by your
CLARKE dealer, or contact the CLARKE Service Department, on 020 8988 7400.
•
Check the pump regularly to ensure the base is clear of leaves or other debris.
Replacing the Impeller
1
Remove the 3 screws on the base of the
pump, and remove the cover.
2
Use a 13mm spanner to remove the nut.
3
Pull the old impeller off of the shaft.
4
Replace with a new impeller and lock it in
place with the nut.
5
Replace the base and use the 3 screws to
secure.
WARNING!
10