Clarke LEP1A 7260060 Kullanım ve Bakım Talimatları Kılavuzu - Sayfa 10
Su Pompası Clarke LEP1A 7260060 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları Kılavuzu indirin. Clarke LEP1A 7260060 12 sayfaları. Clean water pump
Sayfayı Yazdır
CLEANING AND MAINTENANCE
MAKE SURE THAT THE PUMP IS DISCONNECTED FROM THE MAINS SUPPLY
BEFORE CLEANING, OR PERFORMING ANY MAINTENANCE.
•
These pumps should require no maintenance other than regular cleaning. If the
pump starts to show signs of wear or damage, contact your CLARKE dealer for
advice.
•
Do not attempt to repair the pump yourself, repairs must be carried out by your
CLARKE dealer, or contact the CLARKE Service Department, on 020 8988 7400.
•
Check the pump regularly to ensure the base is clear of leaves or other debris.
Replacing the Impeller
1
Remove the 3 screws on the base of the
pump, and remove the cover.
2
Use a 13mm spanner to remove the nut.
3
Pull the old impeller off of the shaft.
4
Replace with a new impeller and lock it in
place with the nut.
5
Replace the base and use the 3 screws to
secure.
WARNING!
10