Clarke PSP195 Manuel d'utilisation et d'entretien - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Clarke PSP195. Clarke PSP195 13 pages. Puddle pump
Imprimer la page
MAINTENANCE
WARNING: BEFORE CHECKING THE CONDITION OF THE PUMP, ENSURE IT
IS UNPLUGGED FROM THE MAINS SUPPLY. IF THE UNIT IS HARD WIRED,
ENSURE THE CIRCUIT BREAKER IS OPEN.
This pump should require no maintenance other than regular cleaning. If the
pump shows signs of wear or damage contact your CLARKE dealer for advice.
CLEANING
1. Check the pump regularly to ensure the water
inlet is clear of leaves or other debris. If foreign
material has been drawn into the pump inlet,
further cleaning may be required.
CLEANING THE FILTER BASE AND IMPELLER
1. Switch off the power supply to the pump.
2. Remove the retaining screws securing the filter
base and lift the base away.
3. Clean the impeller and check that it can spin
freely.
4. Re-fit the filter base.
CLEANING THE FLOAT SWITCH
1. If a collection of foreign material is
impeding the movement of the
float switch it may be necessary
to clean it.
2. Position the control tab at "O" and
unclip the cover by pulling it away
from the pump body.
3. Remove any foreign material that
prevents the free movement of
the float.
4. Re-fit the cover.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
7