Clarke PSP195 운영 및 유지보수 지침 매뉴얼 - 페이지 7

{카테고리_이름} Clarke PSP195에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke PSP195 13 페이지. Puddle pump

MAINTENANCE

WARNING: BEFORE CHECKING THE CONDITION OF THE PUMP, ENSURE IT

IS UNPLUGGED FROM THE MAINS SUPPLY. IF THE UNIT IS HARD WIRED,

ENSURE THE CIRCUIT BREAKER IS OPEN.

This pump should require no maintenance other than regular cleaning. If the

pump shows signs of wear or damage contact your CLARKE dealer for advice.

CLEANING

1. Check the pump regularly to ensure the water

inlet is clear of leaves or other debris. If foreign

material has been drawn into the pump inlet,

further cleaning may be required.

CLEANING THE FILTER BASE AND IMPELLER

1. Switch off the power supply to the pump.

2. Remove the retaining screws securing the filter

base and lift the base away.

3. Clean the impeller and check that it can spin

freely.

4. Re-fit the filter base.

CLEANING THE FLOAT SWITCH

1. If a collection of foreign material is

impeding the movement of the

float switch it may be necessary

to clean it.

2. Position the control tab at "O" and

unclip the cover by pulling it away

from the pump body.

3. Remove any foreign material that

prevents the free movement of

the float.

4. Re-fit the cover.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]