Clarke 6460230 Manuel d'utilisation et d'entretien - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Clarke 6460230. Clarke 6460230 17 pages. 85 mm plunge saw
Imprimer la page
OPERATION
SWITCHING ON/OFF
The On/Off switch is equipped with a
Plunge Release Button which is
designed to prevent accidents.
TO SWITCH ON:
Push the Plunge Release Button
forward and then press the On/Off
switch.
TO SWITCH OFF:
Release the On/Off switch.
CUTTING WITH SAW
WARNING: ALWAYS CUT IN A FORWARD DIRECTION. NEVER DRAW THE
SAW BACKWARDS WHILE CUTTING.
1. Check and ensure the protective
cover can work properly.
2. Check and ensure the blade is
sharp and suitable for the material
to be cut.
3. Make any adjustments required to
the depth of cut.
4. Secure the workpiece firmly on a
flat surface.
5. Plug into main supply.
6. Place the base plate on workpiece. Align the indicator line on base plate
with the cutting line marked on workpiece.
7. Grasp the tool firmly. Switch on and wait for the blade to reach full speed.
8. Press the plunge release button and plunge the blade into workpiece
slowly. Then push the tool forwards along the cutting line.
9. Once the cut has been finished, lift the tool from the work surface before
switching off.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
12