Clarke 6460230 운영 및 유지보수 지침 매뉴얼 - 페이지 12

{카테고리_이름} Clarke 6460230에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke 6460230 17 페이지. 85 mm plunge saw

OPERATION

The On/Off switch is equipped with a

Plunge Release Button which is

designed to prevent accidents.

TO SWITCH ON:

Push the Plunge Release Button

forward and then press the On/Off

switch.

TO SWITCH OFF:

Release the On/Off switch.

WARNING: ALWAYS CUT IN A FORWARD DIRECTION. NEVER DRAW THE

SAW BACKWARDS WHILE CUTTING.

1. Check and ensure the protective

cover can work properly.

2. Check and ensure the blade is

sharp and suitable for the material

to be cut.

3. Make any adjustments required to

the depth of cut.

4. Secure the workpiece firmly on a

flat surface.

5. Plug into main supply.

6. Place the base plate on workpiece. Align the indicator line on base plate

with the cutting line marked on workpiece.

7. Grasp the tool firmly. Switch on and wait for the blade to reach full speed.

8. Press the plunge release button and plunge the blade into workpiece

slowly. Then push the tool forwards along the cutting line.

9. Once the cut has been finished, lift the tool from the work surface before

switching off.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]