Clarke 6460230 운영 및 유지보수 지침 매뉴얼 - 페이지 11

{카테고리_이름} Clarke 6460230에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke 6460230 17 페이지. 85 mm plunge saw

CHANGING THE SAW BLADE

WARNING: ALWAYS DISCONNECT THE SAW FROM THE POWER SUPPLY

BEFORE MAKING ADJUSTMENTS.

1. Press and hold the spindle lock

button.

2. Loosen the clamping screw using

a hex key.

3. Remove the clamping screw,

washer and flange.

4. Set the cutting depth to

maximum.

5. Press the plunge release button

and lift up the base plate.

6. Lift the blade up off the spindle

and pull it from the saw.

7. Install the new saw blade in

reverse order.

• The arrow on the saw blade

must match the arrow showing

the direction of rotation on the

guard.

8. Press the spindle lock button and

tighten the clamping screw firmly.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]