Clarke 6460230 운영 및 유지보수 지침 매뉴얼 - 페이지 9

{카테고리_이름} Clarke 6460230에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke 6460230 17 페이지. 85 mm plunge saw

ELECTRICAL CONNECTIONS

WARNING: READ THESE ELECTRICAL SAFETY INSTRUCTIONS FULLY

BEFORE CONNECTING THE PRODUCT TO THE MAINS SUPPLY.

This product is provided with a standard 13 amp, 230 volt (50Hz), BS 1363 plug,

for connection to a standard, domestic electrical supply. Should the plug

need changing, make sure that a plug of identical specification is used.

WARNING: THE WIRES IN THE CABLE ARE COLOURED AS FOLLOWS:

BLUE = NEUTRAL

If the colours of the wires in the power cable do not correspond with the

markings on the terminals of your plug, proceed as follows.

• Connect the blue wire

to the terminal which

is marked N.

• Connect the brown

wire to the terminal

which is marked L.

We recommend that this plunge saw is connected to the mains supply via a

Residual Current Device (RCD)

If in doubt, consult a qualified electrician. DO NOT attempt any repairs yourself

This symbol indicates that this is a Class II product, and does not

require an earth connection.

Always use an approved cable extension suitable for the power rating of this

tool (see specifications), the conductor size must be at least the same size as

that on the machine, or larger. When using a cable reel, always unwind the

cable completely.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

BROWN = LIVE

Plug must be BS1363/A approved.

Neutral

(Blue)

make sure that the outer sheath of

the cable is firmly held by the clamp

Always fit

a 13 Amp

fuse.

Live

(Brown)