- ページ 11

ソウ Clarke 6460230のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke 6460230 17 ページ。 85 mm plunge saw

CHANGING THE SAW BLADE

WARNING: ALWAYS DISCONNECT THE SAW FROM THE POWER SUPPLY

BEFORE MAKING ADJUSTMENTS.

1. Press and hold the spindle lock

button.

2. Loosen the clamping screw using

a hex key.

3. Remove the clamping screw,

washer and flange.

4. Set the cutting depth to

maximum.

5. Press the plunge release button

and lift up the base plate.

6. Lift the blade up off the spindle

and pull it from the saw.

7. Install the new saw blade in

reverse order.

• The arrow on the saw blade

must match the arrow showing

the direction of rotation on the

guard.

8. Press the spindle lock button and

tighten the clamping screw firmly.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]