Clarke GRH15 Manuel d'utilisation et d'entretien - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Clarke GRH15. Clarke GRH15 17 pages. Portable gas radiant heater
Imprimer la page
WARNING: DO NOT FACE THE HEATER ELEMENT WHEN STARTING - ALWAYS
STAND TO ONE SIDE.
NOTE: If a new gas cylinder has been
connected, it may take time
for the gas line to be purged
of air. Press the Piezo electric
button every 10-15 seconds
until it ignites.
3. Alternatively, hold a lit taper to
the burner face while pressing
and holding the control valve
button. After the burner ignites,
keep the button pressed for 12-15
seconds or until the burner stays lit
after releasing the button.
NOTE: In cases where a long run of
gas supply line has been used,
it may be necessary to bleed
trapped air out of the supply
line before lighting. Open the
shut off valve and listen for the
gas passing through the
heater for a few moments
before operating the igniter and attempting to light the heater. New
installations generally require this.
NOTE: When lighting the burner with a taper, light at the bottom of the
screen, not at the nozzle.
SHUTTING OFF THE HEATER
1. Close the propane gas supply cylinder valve.
2. Observe the burner until the flame is extinguished.
3. Close the shut off valve on the heater.
4. DO NOT re-open the propane gas supply cylinder valve before the shut-off
valve is closed.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
11