Clarke 3108005 Manuel d'utilisation et d'entretien - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Clarke 3108005. Clarke 3108005 17 pages. 3pc air tool kit
Imprimer la page
3. Remember that some modern paints require specialist respiratory
protection. Always consult the paint manufacturers instructions.
WARNING: NEVER ATTEMPT TO SPRAY UNLESS YOU ARE WEARING
SUITABLE, APPROVED RESPIRATORY AND EYE PROTECTION.
4. Ensure that the area in which you will be spraying is clean and dust free. To
obtain best results, it is vital that the surface to be sprayed is well prepared.
It must be clean, free from dust, dirt and grease. Mask any area that is not
to be sprayed and cover adjacent equipment to protect from overspray.
5. Check the paint manufacturers instructions for any special surface
preparation required.
• REMEMBER - TIME SPENT PREPARING SAVES TIME SPENT FINISHING.
PAINT THINNING
Paint thinning is particularly important when spraying. Many paints are
supplied ready for brush application and need to be sufficiently diluted for
spraying purposes. Always follow the paint manufacturers instructions. If in
doubt, always consult the paint manufacturer.
A Viscosity Cup (not supplied), will assist in determining the correct thickness of
the paint.
The ideal viscosity for most paints is as follows:
Water based paints
Oil based paints
Enamel paints
Primers
Varnishes
Aluminium paints
Wood preservatives
Wood Stains
Smooth masonry paint
1. Dip the cup into the paint and fill to the brim. Time how long it takes for the
cup to empty.
2. Thin as required until times are achieved.
3. Alternatively if a viscosity cup is not available, the following information
can be used as a rough guide.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
35-45 secs
15-25 secs
15-25 secs
20-30 secs
20-25 secs
15-25 secs
Do not dilute
Do not dilute
Dilute by 10-15%
6