DirekTronik ED3331 Manuel de démarrage rapide - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} DirekTronik ED3331. DirekTronik ED3331 12 pages. 10/100base-tx industrial ethernet extender

Imprimer la page

10/100Base-TX Industrial Ethernet Extender

Installation

This chapter gives step-by-step installation instructions for the Ethernet

Extender.

Selecting a Site for the Equipment

As with any electric device, you should place the equipment where it will not

be subjected to extreme temperatures, humidity, or electromagnetic

interference. Specifically, the site you select should meet the following

requirements:

The ambient temperature should be between -10 to 60 degrees Celsius.

The relative humidity should be less than 95 percent, non-condensing.

Surrounding electrical devices should not exceed the electromagnetic

field (RFC) standards.

Make sure that the equipment receives adequate ventilation. Do not

block the ventilation holes on each side of the equipment.

The power outlet should be within 1.8 meters of the product.

Connecting to Power

This Ethernet Extender is a plug-and-play device.

Connect the supplied AC to DC power adaptor to the receptacle on the

rear panel of the Ethernet Extender, and then attach the plug into a

standard AC outlet.