DirekTronik ED3331 빠른 시작 매뉴얼 - 페이지 10
{카테고리_이름} DirekTronik ED3331에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DirekTronik ED3331 12 페이지. 10/100base-tx industrial ethernet extender
페이지 인쇄10/100Base-TX Industrial Ethernet Extender
Installation
This chapter gives step-by-step installation instructions for the Ethernet
Extender.
Selecting a Site for the Equipment
As with any electric device, you should place the equipment where it will not
be subjected to extreme temperatures, humidity, or electromagnetic
interference. Specifically, the site you select should meet the following
requirements:
The ambient temperature should be between -10 to 60 degrees Celsius.
The relative humidity should be less than 95 percent, non-condensing.
Surrounding electrical devices should not exceed the electromagnetic
field (RFC) standards.
Make sure that the equipment receives adequate ventilation. Do not
block the ventilation holes on each side of the equipment.
The power outlet should be within 1.8 meters of the product.
Connecting to Power
This Ethernet Extender is a plug-and-play device.
Connect the supplied AC to DC power adaptor to the receptacle on the
rear panel of the Ethernet Extender, and then attach the plug into a
standard AC outlet.
10