CLAS OM 9203 Manuel - Page 13
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} CLAS OM 9203. CLAS OM 9203 20 pages. Coffret extracteur injecteurs fiat, coffret extracteur injecteurs fiat
Imprimer la pageOM 9203
INJECTOR EXTRACTOR SET FIAT
DANGER: is used when your action or lack of action may cause serious injury or even death:
• To avoid personal injury keep hands and feet away from cylinder and components under strain;
• An unexpected grease leakage could tear skin, causing serious injury; in that case, seek medical
advice immediately. If oil penetrates the skin, see a doctor immediately.
• Always wear the personal protective devices indicated
APPLICATION FIELD
The mechanical characteristics, shape and dimensioning of Clas mechadraulic cylinders make
their use limited to car industry, such as:
• Disassembly of injectors;
• Assembly of bearings;
• Coaxial release of very tight mechanical components;
TECHNICAL DATA
TABLE A
Force
Stroke
Dimensions
Driving torque/Max. Pressure
Weight with grease
Extraction bushes supplied
ATTENTION: Use the Max. torque
indicated in the chart in the first
part of the manual (page 4).
Grease temperature range of use
Recommended viscosity of the
fluid
Center distance of the 4 holes for
fastening the cylinder
Size of fixing holes
OPERATION
Use the cylinder only with the bushes supplied. Do not use improperly.
• Cylinder should be placed so as to have a stable and firm base, which is perpendicular to the
direction of the piston thrust.
• Lubricate the screw with grease or lubricating oil.
• Move forward the piston screwing clockwise the screw pusher, which is on the handle. Use a
normal CH. 19 wrench and keep fix the hexagonal end part with a CH.30 wrench. Do not use
electrical or pneumatic screwers or other power-assisted systems to increase the torque on the
pusher.
The piston maximum stroke is of 8 mm.
The screw cannot be screwed beyond this travel.
• For piston return, unscrew anti-clockwise the pusher up to complete withdrawal of the former.
Remove the mechadraulic cylinder from its position only after verifying that each component is
not stressed by its thrust.
Notes: Do not allow piston rotation during its thrust. Piston rotation could damage internal seals
above all the return spring.
12,62 Ton
12 Ton (117679.8 N)
8 mm
80x260x45 mm
56Nm/700 Bar
1,65 Kg
M18x1.5
M16
M14
M12
M10
from -25°C to 80°C
15÷100 mm²/s
68 x 36,5 mm (rif. A)
Ø7 mm (rif. A)