- ページ 13

電動工具 CLAS OM 9203のPDF マニュアルをオンラインで閲覧またはダウンロードできます。CLAS OM 9203 20 ページ。 Coffret extracteur injecteurs fiat, coffret extracteur injecteurs fiat

ページを印刷する

OM 9203

INJECTOR EXTRACTOR SET FIAT

DANGER: is used when your action or lack of action may cause serious injury or even death:

• To avoid personal injury keep hands and feet away from cylinder and components under strain;

• An unexpected grease leakage could tear skin, causing serious injury; in that case, seek medical

advice immediately. If oil penetrates the skin, see a doctor immediately.

• Always wear the personal protective devices indicated

APPLICATION FIELD

The mechanical characteristics, shape and dimensioning of Clas mechadraulic cylinders make

their use limited to car industry, such as:

• Disassembly of injectors;

• Assembly of bearings;

• Coaxial release of very tight mechanical components;

TECHNICAL DATA

TABLE A

Force

Stroke

Dimensions

Driving torque/Max. Pressure

Weight with grease

Extraction bushes supplied

ATTENTION: Use the Max. torque

indicated in the chart in the first

part of the manual (page 4).

Grease temperature range of use

Recommended viscosity of the

fluid

Center distance of the 4 holes for

fastening the cylinder

Size of fixing holes

OPERATION

Use the cylinder only with the bushes supplied. Do not use improperly.

• Cylinder should be placed so as to have a stable and firm base, which is perpendicular to the

direction of the piston thrust.

• Lubricate the screw with grease or lubricating oil.

• Move forward the piston screwing clockwise the screw pusher, which is on the handle. Use a

normal CH. 19 wrench and keep fix the hexagonal end part with a CH.30 wrench. Do not use

electrical or pneumatic screwers or other power-assisted systems to increase the torque on the

pusher.

The piston maximum stroke is of 8 mm.

The screw cannot be screwed beyond this travel.

• For piston return, unscrew anti-clockwise the pusher up to complete withdrawal of the former.

Remove the mechadraulic cylinder from its position only after verifying that each component is

not stressed by its thrust.

Notes: Do not allow piston rotation during its thrust. Piston rotation could damage internal seals

above all the return spring.

12,62 Ton

12 Ton (117679.8 N)

8 mm

80x260x45 mm

56Nm/700 Bar

1,65 Kg

M18x1.5

M16

M14

M12

M10

from -25°C to 80°C

15÷100 mm²/s

68 x 36,5 mm (rif. A)

Ø7 mm (rif. A)