- ページ 15

電動工具 CLAS OM 9203のPDF マニュアルをオンラインで閲覧またはダウンロードできます。CLAS OM 9203 20 ページ。 Coffret extracteur injecteurs fiat, coffret extracteur injecteurs fiat

OM 9203

INJECTOR EXTRACTOR SET FIAT

STORAGE

Protect cylinders from water if storage is in the open air.

HOW TO USE

• Remove the electrical connection from the injector's

head (fig. 1);

• Remove from the injector the internal solenoid

connector: also in this case it is recommended the

usage of the wrench (fig. 2);

• Screw the M18x1.5 screw inside the whole length of

the injector's thread (fig. 3), then, screw completely

the M27x1 ring nut on to the screw, the ring nut must

touch the head of the screw (fig. 4);

• Insert into the 3 holes the feet to support the bar

(fig. 5);

• Now put the bar on the 3 feet already mounted (fig.

6);

• Fix the bar to the feet, using the 3 plates supplied

(fig. 7);

• Insert on the M18x1.5 screw the ring nut with the

internal bearing and fix it with the M18 x1.5 nut (fig.

8);

• Now remove the injector, using a 30 mm wrench for

the M18 nut and a 10 mm wrench for the M18 screw

(fig. 9);

• After the injector's removal, remove the screw and

the ring nut and keep on dismounting all the other

injectors (fig. 10) following the same procedure.