Nikon R10 Super Zoom Manuel d'instruction - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Nikon R10 Super Zoom. Nikon R10 Super Zoom 36 pages.
Également pour Nikon R10 Super Zoom : Manuel d'instruction (37 pages)
Imprimer la page
LOADING THE FILM
The
camera
accepts a
Kodapak*
instant-load cartridge containing 50
feet of Super-8 movie film. At a film
speed of 18 fps, this film will run for
approximately
three
minutes
and
twenty seconds. To load the camera,
turn the cartridge compartment lock
in the direction of the arrow and
swing open the flap from the top.
Place a cartridge in the compartment
with the label facing up and the
cartridge
notches toward the lens.
Then push it forward until it clicks
into place. The ASA film speed is set
automatically. The name of the film
can be seen in the window on the
flap.
Caution: To prevent Improper operation
of the camera's servo-EE mechanism, as
well as excessive battery drain, do not
operate the trigger until after a film car-
ridge has been installed.
Unloading the Film
When the red warning circle appears
in the viewfinder and the foptage
counter reads 50, the end of the film
cartridge has been reached. Open the
camera and slip out the cartridge.
The word "exposed" will appear on
the film to indicate that it has been
exposed and prevent mix-ups. If you
load a partially exposed cartridge,
the red circle in the viewfinder is the
only indicator to tell you when you
have reached the end of the film.
"'Kodapak is a registered trademark of the
Eastman Kodak Company.
Film End Mark
LOADING THE FILM-7