Nikon R10 Super Zoom Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kamera filmowa Nikon R10 Super Zoom. Nikon R10 Super Zoom 36 stron.
Również dla Nikon R10 Super Zoom: Instrukcja obsługi (37 strony)

Drukuj stronę

LOADING THE FILM

The

camera

accepts a

Kodapak*

instant-load cartridge containing 50

feet of Super-8 movie film. At a film

speed of 18 fps, this film will run for

approximately

three

minutes

and

twenty seconds. To load the camera,

turn the cartridge compartment lock

in the direction of the arrow and

swing open the flap from the top.

Place a cartridge in the compartment

with the label facing up and the

cartridge

notches toward the lens.

Then push it forward until it clicks

into place. The ASA film speed is set

automatically. The name of the film

can be seen in the window on the

flap.

Caution: To prevent Improper operation

of the camera's servo-EE mechanism, as

well as excessive battery drain, do not

operate the trigger until after a film car-

ridge has been installed.

Unloading the Film

When the red warning circle appears

in the viewfinder and the foptage

counter reads 50, the end of the film

cartridge has been reached. Open the

camera and slip out the cartridge.

The word "exposed" will appear on

the film to indicate that it has been

exposed and prevent mix-ups. If you

load a partially exposed cartridge,

the red circle in the viewfinder is the

only indicator to tell you when you

have reached the end of the film.

"'Kodapak is a registered trademark of the

Eastman Kodak Company.

Film End Mark

LOADING THE FILM-7