Clas Ohlson 31-1751-1 Manuel - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Clas Ohlson 31-1751-1. Clas Ohlson 31-1751-1 15 pages. Retractable side screen
Imprimer la page
Fastening the side screen to a wall
Make sure that the wall surface is flat so that the wall brackets can be fastened firmly.
1. Measure and mark out where you want to place the brackets (A) and mark the
holes for screwing into the wall.
2. Concrete wall: Drill the mounting holes and insert the wall plugs (G).
3. Mount the brackets (A) using the small screws (D).
4. Wooden wall: Mount the brackets (A) using the small screws (D).
G
D
5. Attach the side screen (B) to the
wall brackets (A) using the bolts
(I). Note: Make sure that the side
screen is turned the right way up
(check the picture).
B
A
F
6. Tighten the bolts (I) using the hex key (F).
D
A
A
B
A
B
4
Post to floor installation
Make sure that the floor surface is flat so that the base plate (J) can be
fastened firmly.
1. Measure and mark out where you want to place the base plate (J) and mark
the holes for screwing into the floor.
2. Concrete floor: Drill the mounting holes first and insert the wall plugs (G1).
3. Attach the base plate (J) to the floor using the large screws (E).
4. Wooden deck: Attach the base plate (J) to the deck using the large screws (E).
G1
J
Instructions for use
F
Pull out the side screen towards the post and fix it to the top and bottom of the post
as shown in the picture.
E
J
E
J
E
E
J
5