Clas Ohlson 31-1751-1 Посібник - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник для Аксесуари Clas Ohlson 31-1751-1. Clas Ohlson 31-1751-1 15 сторінок. Retractable side screen

Fastening the side screen to a wall

Make sure that the wall surface is flat so that the wall brackets can be fastened firmly.

1. Measure and mark out where you want to place the brackets (A) and mark the

holes for screwing into the wall.

2. Concrete wall: Drill the mounting holes and insert the wall plugs (G).

3. Mount the brackets (A) using the small screws (D).

4. Wooden wall: Mount the brackets (A) using the small screws (D).

5. Attach the side screen (B) to the

wall brackets (A) using the bolts

(I). Note: Make sure that the side

screen is turned the right way up

(check the picture).

6. Tighten the bolts (I) using the hex key (F).

Post to floor installation

Make sure that the floor surface is flat so that the base plate (J) can be

fastened firmly.

1. Measure and mark out where you want to place the base plate (J) and mark

the holes for screwing into the floor.

2. Concrete floor: Drill the mounting holes first and insert the wall plugs (G1).

3. Attach the base plate (J) to the floor using the large screws (E).

4. Wooden deck: Attach the base plate (J) to the deck using the large screws (E).

Instructions for use

Pull out the side screen towards the post and fix it to the top and bottom of the post

as shown in the picture.