DIS Sensors CAN Manuel de l'utilisateur - Page 17

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DIS Sensors CAN. DIS Sensors CAN 18 pages. Inclination safety sensor

Imprimer la page
DIS Sensors CAN Manuel de l'utilisateur
CAN User Manual
Inclination Safety Sensor
(Type D) V2.0

14 EDS files

The "Electronic Data Sheet" (EDS file) is a file format that describes the communication behavior and the object
dictionary entries of a device. In fact it's a template. This allows tools such as CAN configuration tools to handle
the device properly. The file format is described in CiA306 V1.3.0
The EDS-file contains all possible settings and functions for the device by describing the CAN object dictionary
for the device to be set by CAN commands.
The EDS-file does not contain a customer specific configuration description (the values of the object dictionary,
like i.e. the chosen baud rate, TPDO1 event time, Node ID etc.). For this purpose the customer can generate a so
called DCF-file (Device Configuration File) with all customer specific settings out of the EDS-file. The DCF file is in
fact the incarnation of the EDS-file.
After loading the DCF-file into the device you have to store the settings into EEPROM by index 1010h sub index
01h to store permanently, see "CAN Object Dictionary Entries".
The EDS-files available for sensors with embedded firmware version D-type described in this document should
have a version D-type also.
The next EDS-files are available at
•
QG_Dtype_1_axis_360v_v*.*
•
QG_Dtype_2_axis_30h_v*.*
•
QG_Dtype_2_axis_90h_v*.*

15 Document revision control

V1.0 first release
V1.1 Add SRD1 objects programming. Add Writing objects in pre-operating state. Major text additions
V1.2 Add commend after review JK
V1.3 Safety information added (MvA)
V1.4 Layout changed (RMo), safety chapters modified (MvA)
V1.5 Change mapping object 1381h for 1 axis and 2 axis according to profile (RMo)
V1.6 20190725 Various more accurate descriptions, some parameters maximized, see release notes firmware
v2.9 & v2.5.3
V1.7 20200831 Insert Peak suppression filter for MEMS elements and for inclination output (MvA)
V1.8 20210823 correct proof test period and pre-set disable/enable(SX).
V1.9 20210917 Re-certification / EC type examination by DEKRA successful. New certificate nr.
V2.0 20220321 Add max. redundancy compare angle.(SX)
www.dis-sensors.com
under 'downloads':
Page 17 of 18