Disc Makers Elite PowerPro Manuel d'installation et de configuration - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et de configuration pour {nom_de_la_catégorie} Disc Makers Elite PowerPro. Disc Makers Elite PowerPro 7 pages. Elite series powerpro thermal printer

Imprimer la page

Elite Setup Guide- Thermal Printer

Step 3A

Step 1

Locate the Thermal Tray and place it onto the Elite unit

If your unit was shipped with the Inkjet Tray attached, remove the

Using the hardware removed from the inkjet tray, install the

InkJet Printer tray and keep the mounting hardware.

FRONT thumb screws to secure the Thermal Tray. (Note: Snug

If your unit was shipped without the Inkjet Printer Tray, Proceed to

the screws, but allow the tray to move for final adjustment)

Step 3A

Step 2

Step 3B

Using the hardware removed from the inkjet tray, install the

View of unit without InkJet Printer Tray

REAR thumb screws to secure the Thermal Tray. (Note:

Snug the screws, but allow the tray to move for final

adjustment)