Discount Car Stereo A2D-GM3 Démarrage rapide Manuel d'installation - Page 2

Parcourez en ligne ou téléchargez le pdf Démarrage rapide Manuel d'installation pour {nom_de_la_catégorie} Discount Car Stereo A2D-GM3. Discount Car Stereo A2D-GM3 6 pages. For gm class iivehicles with xm tuner module and/or remote cd changer

Imprimer la page

PRODUCT SAFETY & DISCLAIMER

READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE

PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY

•

This installation guide is provided as a GENERAL installation guide, some vehicles vary and

may require additional steps. We do not accept responsibility for third party labor charges

or modifications. Exercise due-diligence when installing this product.

•

We do not accept any responsibility for vehicle damage or personal injury resulting from

the installation of this product.

Careless installation and operation can result in equipment damage

•

Requirements:

XM tuner module or remote cd changer or RSE

Introduction

Many GM owners will be pleased to know they are now able to add Bluetooth

music streaming features without changing the original radio. The A2D-GM3

Bluetooth receiver works in select 2003-09 Class II Radios with

10 or 12-disc CD changer** and/or an XM Tuner module (with or without

subscription) or RSE (Rear Seat

least one factory option which remains connected and functional.

Note: The 6-disc changer built-into the AM/FM radio is internal not external or

remote.

A Bluetooth wireless connection means no wires, clutter or complicated setup.

All user has to do is connect adapter (to radio), pair Smartphone or Tablet and

enjoy GPS, Music, and other important applications on the car system.

See Frequently Asked question at the end of this guide for details.

External 6/

Entertainment)- vehicle must have at

Installation –

to radio

Remove radio from dashboard to gain access to connectors. (Vehicle

specific radio removal instructions are not part of this guide, but

available upon request)

2. Press 12-pin plug release tabs to disconnect plug from radio (See Fig. 1)

3. Connect factory 12-pin plug (removed in step 2), to 12-pin gray

connector on harness (See Fig. 2)

Installation harness

Fig. 1

Fig.2