Discount Car Stereo A2D-GM3 Démarrage rapide Manuel d'installation - Page 3

Parcourez en ligne ou téléchargez le pdf Démarrage rapide Manuel d'installation pour {nom_de_la_catégorie} Discount Car Stereo A2D-GM3. Discount Car Stereo A2D-GM3 6 pages. For gm class iivehicles with xm tuner module and/or remote cd changer

Imprimer la page

4. Connect harness 12-pin plug (See. Fig.2) to radio 12-pin connector

vacated in step 2.

5. Connect black wire to ground (we recommend radio chassis)

Red wire

on installation harness must be connected to a 12V

Accessory supply in vehicle.

Warning: Accessory (ACC) supply available on BROWN wire (Most

GM's) under steering column or on climate control harness or in

driver side fuse panel.

Always use voltmeter to verify voltage and check for engine noise

prior to finalizing. Accessory power is active when ignition is in "ACC"

or "ON "positions

Pairing

Pairing process varies among devices but the basic steps are the same.

This process is done upon initial install and may not have to be repeated.

Turn Ignition and Radio "ON"

LED inside module peephole will flash (pairing mode)

Bluetooth Settings

2. Go to device

Bluetooth

3. Select

and turn on.

Scan for devices

4. Tap

5. Wait for Bluetooth name to appear and select it. (See images below)

LED inside module peephole will glow steady (paired)

Not retaining remote CD changer and/or XM Subscription

Retaining remote CD changer and/or XM Subscription