3D AEROWORKS Pilatus PC-21 Manuel d'assemblage et manuel d'utilisation - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel d'assemblage et manuel d'utilisation pour {nom_de_la_catégorie} 3D AEROWORKS Pilatus PC-21. 3D AEROWORKS Pilatus PC-21 19 pages.
Imprimer la page
8
Place a drop of CA in the hinge slot of the control surface and insert the hinge. Be sure that
the hinge is perpendicular to the control surface. Then bend the hinges to 90deg back and
forward a few times to make sure they are appropriately loose. (the outer aileron and
elevator hinge may need to be trimmed). See below
9
Fit the horizontal stabilisers to the fuselage using small sections of 3mm bbq skewers to align
the stabilises and glue with CA.