3D AEROWORKS Pilatus PC-21 Montaj Kılavuzu ve Kullanım Kılavuzu - Sayfa 9
Oyuncak 3D AEROWORKS Pilatus PC-21 için çevrimiçi göz atın veya pdf Montaj Kılavuzu ve Kullanım Kılavuzu indirin. 3D AEROWORKS Pilatus PC-21 19 sayfaları.
Sayfayı Yazdır
8
Place a drop of CA in the hinge slot of the control surface and insert the hinge. Be sure that
the hinge is perpendicular to the control surface. Then bend the hinges to 90deg back and
forward a few times to make sure they are appropriately loose. (the outer aileron and
elevator hinge may need to be trimmed). See below
9
Fit the horizontal stabilisers to the fuselage using small sections of 3mm bbq skewers to align
the stabilises and glue with CA.