ARNOLD MCU 400 D Manuel - Page 14
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} ARNOLD MCU 400 D. ARNOLD MCU 400 D 20 pages. Mirrorball motorcontroller
Mirrorball Motorcontroller
1. 1-channel Mode
In this mode you can set the DMX starting address and operate the device with a DMX controller.
01) In the main menu, press the SELECT button until the selection arrow appears in the upper line.
02) Press the UP/DOWN buttons until the display shows 1CH:
03) Press the SELECT button to move the selection arrow to the lower line.
04) Press the UP/DOWN buttons to set the DMX starting address. The adjustment range is 001–512.
2. 2-channel Mode
In this mode you can set the DMX starting address and operate the device with a DMX controller.
01) In the main menu, press the SELECT button until the selection arrow appears in the upper line.
02) Press the UP/DOWN buttons until the display shows 2CH:
03) Press the SELECT button to move the selection arrow to the lower line.
04) Press the UP/DOWN buttons to set the DMX starting address. The adjustment range is 001–512.
Ordercode: 60455
13